Adjustable DWIN Touchscreen stand (CR-6 SE, Ender 3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A touch screen stand so your DWIN touch screen may stand alone from the printer itself. I printed this because I have…
- Rating
- 4.5 / 5
- Likes
- 26
- Downloads
- 146
- Makes
- 2
- Views
- 2,320
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A touch screen stand so your DWIN touch screen may stand alone from the printer itself. I printed this because I have a CR-6 DWIN touch screen on my Creality CR-10 Smart with BTT SKR board and I like the touch screen better when it is separate from the printer.
Features:
- Stand is adjustable
There is an extrusion to allow easy firmware updating using a microSD card (well... easy, with a DWIN touch screen? ;) ) Optional prints: Soft feet to print in 95A or (preferable) 85A TPU to allow increased drag on a desk.
Optional: Print a washer in TPU (included).
Optional: Cover up the screw holes remaining on the printer with the 4040 extrusion end cap.
Fusion 360 archive and step file is included.
Print Settings
Printer:
Creality CR-6 SE
Rafts:
No
No
Resolution:
0.2mm
20
Filament: Creality HPPLA White and black
Notes:
Specifically designed not to need supports.
You may want to print the axis and nut with variable layer height so the threads come out right.
Post-Printing
Screw on the back cover with the existing DWIN touch screen screws (M3x10mm)
Glue the axis parts on it (with superglue), or use M5x10 screws
Steps
- Screw on the back cover with the existing DWIN touch screen screws (M3x10mm) Glue the axis parts on it (with superglue), or use M5x10 screws. Take note: the left part is not the same as the right part. Add the axis, press the stand into it and optionally glue it in (not necessary though - friction fit is fine).
Category: 3D Printer Accessories