1 / 3
Mr. Fusion Dice Tower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Great Scott! Print your own Mr. Fusion Reactor prop that's also a dice tower! Gloop and Protopasta merged together to…
- Rating
- 0 / 5
- Likes
- 63
- Downloads
- 141
- Makes
- 1
- Views
- 995
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Great Scott! Print your own Mr. Fusion Reactor prop that's also a dice tower!
Gloop and Protopasta merged together to form a special collab for the February Endless PLA Subscription!
Learn more about this collab here: Gloop x Protopasta
Want this model a month early and/or sell this design? Become an Endless Designs Subscriber here: Endless Designs Subscription
Print Settings
Rafts:
Doesn't Matter
Resolution:
.2mm Layer Height
Infill:
15-25%
Filament:
Protopasta HTPLA
Notes:
- The Mr. Fusion Base top is a 3mf if you want to print with color
- Supports Needed for Lever
- Supports optional for bolt holes on the base bottom and top
- Print all parts
- Secure the lever onto the front of the base
- Secure the Top to the Bottom using the 10mm nut and bolt
- Slide the container into place of the base top
- Gently pressure fit the knob onto the back
- I found that heating it a bit with a lighter helps because it will want to snap if you press too hard
- Press the lid onto the top
- Some sanding may be necessary due to printer tolerances
Category: Dice