Betsy Ross Flag Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Betsy Ross' 13 star flag in the form of a refrigerator magnet
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Summary:
Betsy Ross Flag themed magnet with no MMU/AMS needed for multiple colors, simply pause on layers to change filament. Magnet measures 3" (76mm) wide.
Print settings:
PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall, optional ironing. I also prefer a smooth build plate for magnets.
Magnets:
Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x3.0. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.
Filament changes:
Color order for filament changes: white, blue, red
If you stick with 0.2 layer heights:
- Layer 18 insert magnets
- Layer 23 change from white to blue
- Layer 26 change from blue to red
*Be sure to double check your slicer for layer pauses