Skeletal Phone Stand (PopSocket Compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cellphone stand that works even if you have a PopSocket, Loopy, or other protrusion on the back of your phone.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sure, there are plenty of phone stands out there. But a lot of them don't work if you have a PopSocket, Loopy, or other gripping device on the back of your phone. Enter, the SPS.
- You can use this even if the phone case has an irregular contour on the back.
- You can charge your phone while it sits.
- You can adjust where the ledges are, to accommodate different types of chargers.
- You can adjust where the back supports are, if you REALLY need the space.
- You can set your phone either vertically or horizontally.
- Filament saving design clocks in at just 32g.
The connector is sized to work with my phones, and should work for most. Let me know if there's interest and I can make adjustable versions, or custom lengths.
Recommend you print the Combined first and test the fit - on my machine these are a snug friction fit. If the ledge and connector are too thick you can adjust and reprint just those. Optionally you can print the Fit Tester model.