Skeletal Phone Stand (PopSocket Compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cellphone stand that works even if you have a PopSocket, Loopy, or other protrusion on the back of your phone.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sure, there are plenty of phone stands out there. But a lot of them don't work if you have a PopSocket, Loopy, or other gripping device on the back of your phone. Enter, the SPS.
- You can use this even if the phone case has an irregular contour on the back.
- You can charge your phone while it sits.
- You can adjust where the ledges are, to accommodate different types of chargers.
- You can adjust where the back supports are, if you REALLY need the space.
- You can set your phone either vertically or horizontally.
- Filament saving design clocks in at just 32g.
The connector is sized to work with my phones, and should work for most. Let me know if there's interest and I can make adjustable versions, or custom lengths.
Recommend you print the Combined first and test the fit - on my machine these are a snug friction fit. If the ledge and connector are too thick you can adjust and reprint just those. Optionally you can print the Fit Tester model.