1 / 2
Cristo Redentor hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm
Filaments Used:
PLA Smarfil RECICLADO NEGRO Transmission Distance: 0.4
PLA Smarfil RECICLADO COLD White Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA PolyTerra Pastel Banana Transmission Distance: 3.5
Swap Instructions:
Start with NEGRO
At layer #10 (0.8mm) swap to COLD White
At layer #15 (1.2mm) swap to Orange
At layer #22 (1.76mm) swap to Pastel Banana for the rest.