1 / 3
Cristo Redentor hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm
Filaments Used:
PLA Smarfil RECICLADO NEGRO Transmission Distance: 0.4
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA Smarfil RECICLADO COLD White Transmission Distance: 4
Swap Instructions:
Start with NEGRO
At layer #8 (0.64mm) swap to Sapphire Blue
At layer #10 (0.8mm) swap to COLD White for the rest.