1 / 8
Wall Mounted Filament Spool Holder - Vacuum Bag Friendly — image 1
1 / 8

Wall Mounted Filament Spool Holder - Vacuum Bag Friendly

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament spool holder that works for vacuum bagged spools as well as unwrapped spools, with hexagons.

Rating
0 / 5
Likes
11
Downloads
34
Makes
0
Views
193
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

Filament spool holder that works for vacuum bagged spools as well as unwrapped spools, with hexagons, because hexagons are the bestagons. Made this for myself as I had a shallow space in a closet that would fit spools held parallel to the wall but not perpendicular. I figured someone else might be in the same situation down the line.

Connecting plate ensures all brackets are equally spaced for easy installation (I wanted to put up a bunch of these and didn't want to have to worry about spacing and leveling separate brackets.

Use tree supports just for the 90 degree overhangs. I set the support overhang level to 88 degrees and that worked great.

Assembly:

Slot the connector plate and connector rod into one side, then connect to the other side until connector plate is tight. (Fit is tight on purpose - use a raft or just file down the nubs until it fits.)

Once assembled, you can level it on the wall as one piece.

I used 3M double sided VHB tape to mount mine to the wall, it seems plenty strong to hold a full spool but no idea on longevity. Otherwise use #8 or #6 flathead screws.

*Update: Use screws.

Thanks to senditbro for the original hook design.

Print Settings

Printer Brand:

ELEGOO

Printer: 

ELEGOO NEPTUNE 3 Pro

Rafts:

Doesn't Matter

Supports: 

Yes

Resolution:

0.2mm

Infill: 

25%

Filament: ELEGOO PLA

 

 

 

Category: 3D Printer Accessories

Tags