Jewellery holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: Broche_holder v7_0.4n_0.15mm_PLA_MK4IS_8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An accessory to use jewellery with a safety pin.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 27
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife has several brooches, jewellery, that you have to attach to clothing by means of a safety pin. However this makes two holes in the fabric.
This gadget corrects that. It is a holder for a thin magnet (20 x 2 mm). Together with another small magnet or thin piece of metal, you can put it on a blouse etc.
The 2 x 20 mm I bought in my hardware store. It also has a small layer of adhesive. If not you can use some glue. In Europe you can order it on line here:
https://www.supermagnete.ch/scheibenmagnete-neodym/scheibenmagnet-20mm-2mm_S-20-02-N
I added the Fusion360 file in case you want to adapt it to different magnets and/or different jewellery.
Please give feedback.
When you print it, share a picture.
When you modify it, post your design file.