Caddx Turtle V2 Pan Tilt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pan/tilt mechanism I made up for the Caddx Turtle V2. Here's a video detailing the assembly and all that…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a pan/tilt mechanism I made up for the Caddx Turtle V2. Here's a video detailing the assembly and all that good stuff. ;)
Parts are all rotated in correct orientation for printing. Print with a 0.4mm extrusion width so the thin walled-standoffs get printed properly. I printed mine at a low layer height and slow speeds since they are some rather small parts. After recording the video, I added some "webbing" to the base to strengthen the front where the "tilt axis" is, around those screws. I printed it with PLA and PETG, both printed fine, PLA was a bit easier to print, but PETG will be more durable, especially on hot summer days. :)
Update 1/12/19 - I added a small "shroud" or mount for the pan servo to fit on top of the Dart XL canopy where I mounted this. Here's a video testing it all out, works well! https://www.youtube.com/watch?v=Nfn7x\_39Ttg
Category: R/C Vehicles