1 / 5
Workbench crank/handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crank/handle replacement for workbench
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 85
- Makes
- 2
- Views
- 416
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
Workbench crank/handle for 8mm or 10mm crank axle. Require 1x 6x70 board bolt and 1 x 6mm self-tightening nut.
The arm require support for printing. Prints well with both PLA and PETG. Use infil at your desire. I recommend 30% or above for added strength.
Use a socket wrench for lose tightening of the nut.