1 / 3
eSUN Cardboard Spool Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
eSun Cardboard Spool Adapter with fillet edges to fit into Bambu AMS guide slots
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 264
- Makes
- 5
- Views
- 1,097
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
The center ring on the original model did not fit in my eSUN cardboard spool. The OD was perfect, so yup the mfgs switch things up. My spools have a ID of around 53.2mm (it's probably 53? but that's what my calipers said). I made the ring to 52.5mm, and it fits correctly.
I also rounded over the edges a little as shown. As is, the spool edges rub in the guides of the AMS slot (at the bottom of the cavity. I also breezed by it with a deburring tool.
0.2 layerheight
0.4 nozzle
I used PETG
PEI Textured Plate