1 / 3
Cubicle Hanger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Took an existing injection molded cubicle coat hanger and recreated it. For cubicles with a width of about 1.75".
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 128
- Makes
- 1
- Views
- 586
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Took an existing injection molded cubicle coat hanger and recreated it. Made a couple and they work well and are near identical to one i recreated.
I did not measure the wall of the cubicle but the inner width of the cubicle hanging section on the existing one was around 48mm/1.88" so I'm assuming the wall thickness of the cubicles this is used on is 45mm/1.75". The 3mf file is included so you may edit it to the width of your cubicle.