1 / 1
Surron front LED Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Model
This allows you to mount an Led headlamp onto a Surron or Enduro ebike using the 4 screws on the top of the front forks.
Print Settings
I would highly recommend printing these with at least 4+ perimeters and at least 3 bottom / top layers.
Parts needed
1x Surron front LED light
2x M5 Screws (included with light)
4x M5 Screws
Print Settings
Supports:
Not needed
Resolution:
0.12mm
Infill:
30%+
Perimeters:
At least 4x
Filament: Any PLA, PETG, ABS, Nylon or any other sturdy filament.