T_B_A's BLTouch Holder for E3D Hemera, but turned around
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
T_B_A's BLTouch Holder for a 40x40x20 Hotend-fan is kind of nice, it needs to be fit tight on the fan to hold.…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
T_B_A's BLTouch Holder for a 40x40x20 Hotend-fan is kind of nice, it needs to be fit tight on the fan to hold.
However, if you turn it 180° around, the little edge of the holder are perfect to hold the mount between the fan and the Hemera :-)
So, my work here is just turning around the Fan-Bracket 180° and then re-adjust the bltouch-holder to have the right height.
With a standard V6 heatblock and an original BLTouch the Nozzle to Probe Z-OFFSET is around -0.3 to -0.8 mm. Your installation may vary a bit.
Start with:
define NOZZLE_TO_PROBE_OFFSET { -24.5, -44, -0.3}
and fine tune from there.
It fits nicely together with the Permanoob's 5015 Fan-Shroud: https://www.thingiverse.com/thing:4031637