1 / 3
Pulley set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set of diferent pulleys
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 105
- Makes
- 1
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
- Guide pulley for slow speed flat belts.
There are two versions one with a 608 bearing bore and the other version is with a 6201 bearing.
Version 608 dimensions : 36x60mm
Version 6201 dimensions : 42x60mm
----------------------------------------------------------------------------------------------------------------
- Pulley for belt type SPZ/Z with diameter 67mm.
There are holes for 6201 bearings on the pulley, unfortunately it cannot be fitted with taper bush. The pulley can of course also be used as a pulley for the rope. I recommend to increase the wall thickness significantly due to abrasion. - I recommend in both cases to increase the wall width in the slicer , add 80% infill and then sand with fine paper after printing.