Ikea Skadis pen/Sharpie holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Couple of pen and sharpie holders for the Ikea Skadis
- Rating
- 4.8 / 5
- Likes
- 58
- Downloads
- 427
- Makes
- 13
- Views
- 1,276
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I designed these two little attachments for the Ikea Skadis because I wanted to keep my pen and my sharpie with the other tools, always at a good reach but without cluttering the workbench.
They are available in two diameters, 12mm and 17mm and they will suite pretty much any cylinder-shaped writing tool.
The small diameter one will fit the Sharpie standing up but you don't want to keep the tip upward not to dry it too much. I suggest keeping them facing down as shown in the pictures.
The fitting on the Skadis is tight but they will fit I promise. I wanted it to be tight to avoid wobbling and to ensure stability when taking the sharpie and putting it away.
I printed both in yellow PETG but i assume PLA would work fine as well.
0.2 layer height with tree support enabled for the hooks.
Post a comment if you add these to your Skadis!