Ikea Skadis pen/Sharpie holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couple of pen and sharpie holders for the Ikea Skadis
- Ocena
- 4,8 / 5
- Polubienia
- 58
- Pobrania
- 431
- Wydruki
- 13
- Wyświetlenia
- 1284
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these two little attachments for the Ikea Skadis because I wanted to keep my pen and my sharpie with the other tools, always at a good reach but without cluttering the workbench.
They are available in two diameters, 12mm and 17mm and they will suite pretty much any cylinder-shaped writing tool.
The small diameter one will fit the Sharpie standing up but you don't want to keep the tip upward not to dry it too much. I suggest keeping them facing down as shown in the pictures.
The fitting on the Skadis is tight but they will fit I promise. I wanted it to be tight to avoid wobbling and to ensure stability when taking the sharpie and putting it away.
I printed both in yellow PETG but i assume PLA would work fine as well.
0.2 layer height with tree support enabled for the hooks.
Post a comment if you add these to your Skadis!