Wildone Hygrometer Filament no-destroy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament and Hygrometer usage without destroying the wildone container which is quite expensive.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Printed as ABS so other material may shrink differently and may not fit until adjusted. No supports needed, no brim or skirt.
Snugfits into top of the Wildone container without glue but can be additionally hotglued a bit. Its not sealed tight and not for continouus ussage. But filament wont get that wet with some open container printing. More like for seldomly used colors with use of AMS and Bambulab printers for example. That’s the price for not destroying the container.
Material
https://www.amazon.de/dp/B07NP98YKY?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B07JG9QZ2B?ref=ppx_yo2ov_dt_b_product_details&th=1
Some 4mm PTFE tubing
STEP is attached as usual, please always share a STEP as stl can not be modified.