Grizzly G4003 BXA QCTP Lathe Back Splash Tool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BXA QCTP holder designed for larger lathes with thicker backsplash
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of a great idea from The_Architect_23, I have the larger Grizzly G4003 lathe and my backsplash had a thicker top. I resized the original holder to fit over the backsplash as well as extended it a little. Resizing also made a nice fit with my BXA holders and allows them to slip on and off easily. Then I added a threaded hole on the back to accept an m10 x 1.5 x 50mm bolt. I have included a knob for the bolt as well. This new feature allows you to just clamp it enough to keep it from moving when lifting off the tool holder. ***Note, I did not use pins as originally called for in The_Architect_23's thing.
I suggest printing on a narrow end and putting 3 supports with z-gap under the dovetail. This orientation will give you the best strength. No other support is needed. Adding a brim is up to you. I did not need it but every printer is different.