1 / 5
Compact Articulated Raspberry PI Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact picam mount. Designed to fit in Kodak Portrait, but should work elsewhere.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 1
- Views
- 197
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Articulated picam camera mount I created because I didn't like the stock one included with this printer (Kodak Portrait).
For assembly there's some additional hardware required:
- 1 countersunk m4 screw, of any length, for mounting wherever you want to mount your camera
- 2x m3 nuts
- 2x m3 40mm countersunk screws for articulation axles. 35mm should work too with a bit of manual convincing
Assembly needs to be done in certain order, otherwise it's impossible to assemble:
- mount the frame mount (square piece with hole in the middle) to whatever you want to mount the camera to
- join mid joint (c-shaped) and camera mount with one of the m3 screws (through the joint, note the countersink) and nut
- insert CSI tape into your camera module
- insert camera module into the camera mount, CSI tape pointing *outside*
- finally join the c-joint to the frame mount
Included CAD files in case you want to modify the design.