1 / 5
Compact Articulated Raspberry PI Camera Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact picam mount. Designed to fit in Kodak Portrait, but should work elsewhere.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 197
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Articulated picam camera mount I created because I didn't like the stock one included with this printer (Kodak Portrait).
For assembly there's some additional hardware required:
- 1 countersunk m4 screw, of any length, for mounting wherever you want to mount your camera
- 2x m3 nuts
- 2x m3 40mm countersunk screws for articulation axles. 35mm should work too with a bit of manual convincing
Assembly needs to be done in certain order, otherwise it's impossible to assemble:
- mount the frame mount (square piece with hole in the middle) to whatever you want to mount the camera to
- join mid joint (c-shaped) and camera mount with one of the m3 screws (through the joint, note the countersink) and nut
- insert CSI tape into your camera module
- insert camera module into the camera mount, CSI tape pointing *outside*
- finally join the c-joint to the frame mount
Included CAD files in case you want to modify the design.