Canon FD body cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for canon camera bodies with FD (manual focus) lens mount
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 836
- Makes
- 8
- Views
- 1,903
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This is a printable body cap for FD mount Canon cameras, such as the T50, T70, T90, F1, A1, AE1 and others…
I modeled this cap after an existing cap.
The print is not quite so simple, as the guides for the bayonet catch have a slope. I achieved a good result by printing the model in PLA with the hollow side down. I used supports, and since I was using a Bambu Lab printer with AMS, PETG as a support interface with no gap.
You may have to fiddle around with orientation and support, but since it is a quick print, it is not that much of an issue.
Use a small or variable layer height because of the slope. In my case 0.12 worked well.
Please leave a make and a like if you find this model useful :)