1 / 3

IKEA LIVBOJ wireless charger case

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A very thin and clean phone stand, also a wireless charger :)

Updated at source: Nov 14, 2024

Model information

.f3d files attached

I separated the chin from the main body, mostly because I wanted a matt finish on the front.

Recommend printing with white filament, so the build-in LED can shine through from the back.

Print all the parts:

Take apart an IKEA LIVBOJ wireless clarger, get the internals:

de-solder the coil, prepare some wires:

Solder on the wires and glue the coil to the back cover piece:

Pass the 2 wires through the hole in the main body

I used some 3M VHB double sided tape, but I found out later it's not strong enough. Better to just use crazy glue

Solder on the wires to the PCB, I also needed to relocate the capacitor.

Then use crazy glue to fix the PCB to the main body

Finally, attach other pieces with crazy glue as well.

I got lazy and didn't glue the bottom piece :) can't see it anyway lol

The onboard LED shines through the thin plastic shell, looks pretty cool!