IKEA LIVBOJ wireless charger case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very thin and clean phone stand, also a wireless charger :)
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 639
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Design
.f3d files attached
I separated the chin from the main body, mostly because I wanted a matt finish on the front.
Recommend printing with white filament, so the build-in LED can shine through from the back.
Installation Procedure
Print all the parts:
Take apart an IKEA LIVBOJ wireless clarger, get the internals:
de-solder the coil, prepare some wires:
Solder on the wires and glue the coil to the back cover piece:
Pass the 2 wires through the hole in the main body
I used some 3M VHB double sided tape, but I found out later it's not strong enough. Better to just use crazy glue
Solder on the wires to the PCB, I also needed to relocate the capacitor.
Then use crazy glue to fix the PCB to the main body
Finally, attach other pieces with crazy glue as well.
I got lazy and didn't glue the bottom piece :) can't see it anyway lol
Photos
The onboard LED shines through the thin plastic shell, looks pretty cool!
