1 / 4
Dune Sandworm Popcorn Bucket Topper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is entirely NON-practical, I would not recommend actually using this, just for decoration! Prints with NO support!
- Rating
- 5 / 5
- Likes
- 176
- Downloads
- 447
- Makes
- 4
- Views
- 5,922
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model is not practical when printed with PLA as you can't actually stick your hand inside. This is just a fun decorative piece.
This is printed entirely without support. To print this, you must have bridging dialed in on your printer.
Instructions:
- Scale the Worm to the desired size. The base by default is 177.88mm x 177.88mm (use math to scale this to fit your bucket if desired)
- Print WITHOUT support
- Use snippers to cut out the middle circle
- Optional: Use a heat gun to mold the “hairs” to your desire.
If you enjoy this model, consider supporting me with these options:
Join my Printables Club or my Patreon!
Social Links: