Counting matching models…
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
To save more space, I designed this vertical stand for the Dreamcast. While ideally suited for DCs that are equipped with optical disc emulators, it will also work with ones that still have their gdrom installed. I recommend printing this…
These are the LOOP style case panels for BeamCase sandwich and BeamCase SFF. Instead of multiple panels that are printed in a flat orientation, these are loops that are printed standing up, and come with two different vent patterns, slots…
These are the parts that are required to mount a Noctua NF-A4x10 5v inside of your Dreamcast. This mod only works in models VA1 and VA2 systems. There are two versions of the latch, the regular one is designed for the original Sega system…
These are case panels v3.2 to cover up your BeamCase and give it a unique look. The handles make it easy to carry and also act as feet and bumpers, though alternative case feet are avaliable. These are only the files for the outer panels,…
The Sega Dreamcast is a great console with a controller that had some odd design choices made for it. The most confusing is the controller cable that exits the back of the controller and then attaches to a clip built into the bottom of…
A much-improved version of my original VMU cap replacement that's about 95% accurate to the official Sega cap. I meticulously measured every little detail to make sure it fits perfectly, and it does! Visually it's not a 1:1 copy but it…
This nut positioner keeps flat square nuts (DIN 562) in their position, so they do not slide around in the Makerbeam XL profile. When adding brackets and other parts to your BeamCase, (or other projects using Makerbeam XL profiles)…
Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament Print instructions Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament
A two piece lens cover for the Logitech StreamCam. Use any bit of filament, 1.75 mm, as a pin for the hinge. Can be printed without support
This is a remix of an old injection moulded model I found. I printed in ABS for strength and environmental resilience, but would probably work with PLA, PETG, etc… The bungee/shock cord goes through the hole at the back and is pushed down…
v2 is now available with better, more printable hinges! If your printer cooling or overhang performance is average, please print with .1mm or .15mm layers Dreamcatchers are Native American charms that originated in the Ojibwe culture,…
A Dreamcatcher using single extrusions of filament as strings to create the web. Print at 0.2mm layer height.
Streamcam holder for tripod with joint. You need a threaded insert M3 (Ruthex) and a screw M3x18. The hole below is a core hole for 1/4 inch tripod thread. If necessary, I also have a lower part for the Ikea "Antifoni" lamp. Dismantle the…
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Hi Barry this really gets a big thanks to Veículos Militares over at the 3DWarehouse for releasing this model, I've had my first real attempt at trying to save a model of this type to a possible printable .STL file Now it is highly…
This Model is only the body! It is designed to be used with the ModCaster Guitar Neck. Files and build instructions for components of the ModCaster System are available on my Printables Page! At this time, some parts from…
This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…
Wall mountable Sega Dreamcast controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This probably could have been split into…
The Sega Dreamcast VMU has a battery life problem. It eats CR2032s for breakfast. Changing the batteries involves using a screw driver. It's a hassle to maintain. Features This project adds a battery pack to the VMU that allows you to…
This bracket is designed to add radiators and fans on top or below your BeamCase in a strong and good looking way. It is available in 50 different versions depending on your setup. These brackets are designed to work together with the…
These are braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The X-braces are made to stiffen your BeamCase frame. They are designed to work with Makerbeam XL…
I got a webcam cover and it was way to thick, when I closed my laptop it would bend the screen. So I designed my own. I wanted tot make it really, really thin but still strong and good quality. Hope you like it as much as I do. I used…
This is a battery attachment for the Steamclip. It is designed for a Baseus 20000 mah unit. This uses a 0.5x5x15mm spring. I will be uploading more models, but please check out my Etsy page MyRandomHobbies for more attachments.
This is the main body for my Steamdeck Clip system "Steamclip" V2 includes a kickstand and SD card storage. You'll need a 1mm metal rod for the kickstand and sd card storage. I used a 1mmx100mm steel rod and cut it to length. I'd also…
Moon and rose dreamcatcher wallart
This is a cable holder and zip tie point for the BeamCase system or other 15x15mm profiles using m3 nuts. With it you can secure cables in place and it helps cable management. These brackets are designed to work together with the modular…
This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm, 140mm and 92mm fans of different thicknesses. The bracket is secured to the fan with standard fan screws and then screwed to the frame from the…
These are corner braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The corner braces are made to stiffen aluminium frames and fit all BeamCase versions (SFF and…
The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's…
If you like the design, please consider tipping on Ko-fi . Thank you! :-)
Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design. Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts…
This fan bracket is made to add fans to your BeamCase (SFF). It comes in different sizes depending on the fan thickness and mounting position. The bracket is secured to the fan with standard fan screws and then it simply screwed to nuts…
A stand for displaying your Dreamcast VMUs. The VMU snaps into place by utilizing the wrist strap connector at the bottom of the unit so it won't move around or accidently fall over. The triangle emblem piece can be printed separately so…
Steamclip for the ROG ally. This will allow you to use all of the Steamclip attachments on the Ally. There are openings in the back for airflow. You'll need a 1mm x 70mm steel rod for the stand and SD card holder. PRINT VERTICALLY!
I had the pins on the right Trigger broken off, and made a small model to fix this issue. Was printed on a Resin printer, and glued into place. This allows the tabs themselves to still flex a little bit, so you can insert it from the top…
This model is one of the collection Prêt à Faire: Printable Readymade Models. Prêt à Faire is an autonomous artistic project, scholarly reference work, and institutional critique by williamCromar , supported by a faculty grant from Penn…
This is a plate for mounting the Terraonion MODE to a Sega Dreamcast. It uses the three existing disc drive screws to mount the plate to the Dreamcast. Four additional screws are needed to attach the MODE itself to the mount. The MODE…
This is a bracket to mount a 16mm button to your BeamCase frame (or other 15x15mm aluminium profiles) These brackets are designed to work together with the modular BeamCase ITX case which can be found here . Required Hardware Screws:…
This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm and 140mm fans. The bracket is secured to the fan with standard fan screws and then it slots into the frame on one side and is screwed to the…
- The one ring that should have been them all- Design Goal Designed a ring for the Prusa Printers flash contest. My goal was to make something nerdy yet simple/elegant, at which I think I succeeded! Printing & size The inner diameter (ID)…
This remix has an obvious and a few less apparent design changes. The most obvious change is that i opened up most of the cover area by removing the top an bottom layers and thus revealing the infill. (I needed to do some geometry…
Gdemu 5.20 mounting bracket for VA0 Mainboard
This is an Dreamcast USB-C PD mount. You'll need an pico PSU from e.g. RexusNexus in addition to that an USB-C PD trigger.
These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…
Simple and fast print of a Dreamcast case emblem that makes it more 3D. I used a 0.25mm nozzle for my print to get cleaner text. Category: Video Games
Logitech StreamCam Lens Cover with an in-place hinge. It can be folded back completely. I printed with a layer height of 0.1mm and the hinge works perfectly
This simple bracket allows you to lock your VMU into the Dreamcast controller and make it extremely difficult to remove. Useful for Kiosk applications or trade shows and conventions. Only works with original Dreamcast controllers and…
Description These foldable legs give your BeamCase plenty of breathing room when in use, but can be folded up for transport. Extended they give 40mm of breathing room, and when folded they only add 11 in height. They fit all BeamCase…
Inspired by Tom DeLonge from blink 182 and my own personal style preferences, this guitar body is a custom design that I made based on the outline of a Fender Starcaster. I made this in to a real working guitar! I cut this model in to 7…
Logitech StreamCam GoPro Mount Snap in place. Tight fit. Not for bike mounts or similar ^^' The lens cover in the pictures is this one: https://www.printables.com/de/model/283582-logitech-streamcam-lens-cover
Logitech streamcam support - 3d print One for the universal Nut (1/4"). Other for direct attach to the cheap tripod.
These are the slide in fan brackets for the BeamCase system. These brackets slide into the aluminium profiles and instead of being screwed to nuts in the profiles which makes them simpler than the other options, but they need to be added…
These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…
Ladies and gentlemen, I present to you the Sega Dreamcast VMU battery cover! Painstakingly re-created from scratch down to (almost) every minute detail! From the pointless little circles to the battery tab slot to the ever-so-slight angle…
English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…
After I dropped my titan the first time I tried to look for a replacement battery door but you need to buy the entire mod again, which I did the first time. Then came 3D printing in my life. Fun as hell! But of course, my precious new mod…
These are HDD brackets designed for BeamCase SFF case allowing to mount 5 HDD, perfect for a NAS build. Miscellaneous: 16 * M3x8 countersunk screws 8 * M3 nut 8 * M3 square nut 20 * HDD screws and rubber grommets I used this kind from…
This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…
Garth's 1976 AMC Pacer from Wayne's World. according to my son this is “Mid” Scaramouche, Scaramouche, can you do the Fandango?" From redit I read that Scaramouche was a clown figure in the operatic world and the fandango is either a…
🌌🦉🦔🦋 Dreamcatcher Collection - Capture Dreams in Style! Key Features: 🪞 Base Plate Design: Each dreamcatcher features a beautifully crafted base plate that serves as the foundation for capturing dreams. 🌟 Ornamental Themes: Space: Embark…
This handle for the BeamCase system can be mounted anywhere along the Makerbeam XL profiles or between them. They can also be utilized as feet. This handle can be used with a bare frame, or with outer panels, there are two separate…
3D printed spacer to be used with the Robot_Retro Dreamcast power supply. robot_retro store Designed by Joseph Tomkins
Logitech Streamcam bipod Use the original streamcam laptop mount as a desktop bipod ^^ Pass the mount through the shirt and slide the legs. Cam can tilt and pan, as if it was a neck. No screws, no magnet, slide in place.
A simple loose-fitting privacy cover for the Logitech StreamCam webcam. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Rear Perimeters: 2 Layer override: 3 perimeters on the topmost layer so no…
Printed in two parts and glued together. The other half is the same part mirrored.
Dreamcatcher ornament @3DPrintBunny
Make sure you have a thin non-regular mainbaord.
These are additional case panel sizes for BeamCase SFF and (m)ATX v5.5. The files include panels that are printed as one piece and ones that are split along the length, in a range of size options. Components structure and naming: Each…
Dreamcatcher body shaped like a spider web. It may be used in other ways too. Diameter is 150mm but you can scale it up or down in slicer to fit you needs.
Slide onto the camera from above. With Logo or without All parts have been drawn by myself. Similarities to other parts by other designers are not intentional and or coincidental. Maybe I was inspired by other designs. If this happened, I…
I saw a double feed practice round while looking for a snap cap model and really liked the concept but the execution just wasn't there so I made my own. These will fit in-between standard rounds or other snap caps but not consecutively. I…
I used gauderio's excellent model and made a 1/32 scale slot car shell. Edit: 28 Nov 2021 - Made some modifications. Added a splitter and air dam, some louvers, and cleaned up the file generally. Removed the mirrors, antenna, and roof…
This bracket is made to add radiators to your BeamCase (SFF). It comes in different sizes depending on the radiator and fan thickness and mounting position. The bracket is secured to the radiator with standard screws and then it simply…
A Z-axis mount for the Logitech SteamCam to attach it to the Ender 3 S1 or Ender 3 S1 Pro. You can use the screw from GreatOldOne . https://www.thingiverse.com/thing:3160367/files Update: The camera occasionally made contact with the…
This bracket is made to add radiators to your BeamCase, there are versions for BeamCase SFF, m(ATX) and Sandwich. It is a simple bracket, that offers a lot of flexibility as the radiator can be moved up or down and forward and back. It…
A new VMU holder design for 2024 has arrived! This one ditches the simple square design of the last one and adopts design elements from the Dreamcast case and VMU to make what could almost pass as an official Dreamcast accessory!…
Slight tweak of Jeff Chen's excellent Dreamcast VMU AAA Battery Pack. The bottom of each half was flattened and widened to allow for vertical printing. Supports are still necessary, but fewer are required and they will be easier to…
I have been working on display stands for various controllers and decided to do one for my VMU I printed 0.2mm layers at 15% infill, no supports are required. Category: Video Games
The best way to store and display up to 10 Dreamcast VMUs or memory cards! Completely redesigned from the ground up, my new VMU holder has slots with a snugger fit, snazzy rounded corners, and a new customizable design for the front. Two…
Just an alternative mechanism that will print in one past with resin printer. More details: https://www.printables.com/model/141672-dreamcast-noctua-fan-mod
Should work with many variations of amcrest cameras and maybe some from other vendors. My camera is an Amcrest IP5M-T1179EW-28MM.…
A model of Sam Porter Bridges' dreamcatcher from the video game Death Stranding.
EDIT 01/11/24: V2 version is here. Few changes compared to V1: reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill) larger access holes (10mm) to more easily access the screws holes increased…
This is modular Dreamcast GDEMU (optical drive emulator) mounting system. It's designed to fit several criteria: Rigidity and sturdiness; Restoration of original airflow; Simple to print (minimal support and overhang); Compatibility with…
I was unable to find the Viture Pro Mobile Dock Mount For Steam Deck Mount anywhere here in the EU and after not finding anything available on the various 3D printing sites, I decided to make my own that would fit to my existing Steamclip.
Instructions This bracket was designed for the GDemu, the one I had was the recent release from AliExpress, please let me know if it doesn't fit yours and I can adjust the base as required! It's designed as modular system, and the…
This a set of split panel case panels for Beamcase ATX, inspired by the “Loop” case panels for Beamcase SW. This design is specifically made to be printable on a 256^3 bed volume, such as Bambu P1/P1S/X1C. On a printer of that size, most…
Adapter for attaching a DC plug to the Dreamcast power supply port, e.g. for use with picoPSU. I designed this from scratch in Fusion 360, but it's based on collingall's work. My main goal was to create a model that prints well without…
My Neptune 3 Pro's LED lighting shines directly into my StreamCam, causing a terrific amount of lens flare. So I made asjolund's snap on cover into a lens hood. No more lens flare. --- Fusion 360 files provided in case you want to print…
This is a one to one recreation of the VMU shell based on 3D scans (Scans created by WeskMods: https://bitbuilt.net/forums/threads/dreamcast-vmu-scan.3988/ ) You'll want to reuse all of the original hardware used in the VMU. For the heat…
Printed in PLA with layer height 0,15mm, no supports.
A simple mount for a Logitech Streamcam and the Ender S1. Can be printed on its side without the need for supports, with the exception of paint on supports for the cable holes. To attach to the body of the S1 I used M5 x 19mm screws.
Alternate print for the Noctua fan mod. Single print.
This external X-Brace enables you to add all sort of accessories to your BeamCase, like camera accessories using 1/4 threads. (in the example image I am using a magic arm to secure my portable screen) This bracket is made to mount…
Mount for logitech streamcam (compatible with gopro accessories)
