1 / 3
Logitech Streamcam Mount with Joint (Remix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Streamcam webcam mount with joint to fit on a 3/8" boom or microphone mount
- Rating
- 4.25 / 5
- Likes
- 32
- Downloads
- 258
- Makes
- 3
- Views
- 1,509
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d
Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design.
- Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts suitable for manually adjustment of the joint.
- The camera grip is tapered to fit the Streamcam body better, similar to the OEM grips.
- The base of the joint has a female 3/8" 16 UNC threaded connector suitable for many microphone and boom mounts.
Recommended print settings
I recommend printing the parts separately. All parts can be printed without supports.
- Streamcam Mount - print with 0.2mm layer height and 3 perimeters.
- Microphone Mount Connector - print with a 0.12mm layer height, or adaptive layers for the threaded base. Orient with the threaded hole at the bottom.
- Nuts - print 2 of them, with a 0.12mm layer height, or adaptive layers. Use the fuzzy skin option for the outside perimeters for better grip. Orient with the threaded hole at the top.
- Bolt thread - print with 0.2mm layer height. If the thread is too tight try reprinting with the printers flow rate reduced by 10%.