1 / 3
Logitech Streamcam Mount with Joint (Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Streamcam webcam mount with joint to fit on a 3/8" boom or microphone mount
- Ocena
- 4,25 / 5
- Polubienia
- 32
- Pobrania
- 258
- Wydruki
- 3
- Wyświetlenia
- 1509
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (1)Kolekcje (36)Powiązane
Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d
Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design.
- Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts suitable for manually adjustment of the joint.
- The camera grip is tapered to fit the Streamcam body better, similar to the OEM grips.
- The base of the joint has a female 3/8" 16 UNC threaded connector suitable for many microphone and boom mounts.
Recommended print settings
I recommend printing the parts separately. All parts can be printed without supports.
- Streamcam Mount - print with 0.2mm layer height and 3 perimeters.
- Microphone Mount Connector - print with a 0.12mm layer height, or adaptive layers for the threaded base. Orient with the threaded hole at the bottom.
- Nuts - print 2 of them, with a 0.12mm layer height, or adaptive layers. Use the fuzzy skin option for the outside perimeters for better grip. Orient with the threaded hole at the top.
- Bolt thread - print with 0.2mm layer height. If the thread is too tight try reprinting with the printers flow rate reduced by 10%.