2.5" Rocket Av Bay
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an avionics sled designed for PML 2.5" coupler tubing for high power rockets.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is an avionics sled designed for PML 2.5" coupler tubing for high power rockets. It has been designed to fit inside a 160mm length of coupler tube, which is slightly longer than the standard length coupler.
Desighn specs:
Rails: 4mm threaded bar (42mm Centre to centre spacing)
Battery: Turnigy nano-tech 2s 460mah LI-PO
Switch: Schurter Voltage Switch SWA
Eggtimer Quantum & Perfectflite Strato logger CF (Willing to add others on request)
Note:
I have now built and successfully flown this design, I will upload some actual photos of it shortly.
Update:
Minor changes to clearances for make build easier.
Added a version that will take a Perfectflite Strato Logger CF.
Print instructions
Category: 3D Printing