2.5" Rocket Av Bay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an avionics sled designed for PML 2.5" coupler tubing for high power rockets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is an avionics sled designed for PML 2.5" coupler tubing for high power rockets. It has been designed to fit inside a 160mm length of coupler tube, which is slightly longer than the standard length coupler.
Desighn specs:
Rails: 4mm threaded bar (42mm Centre to centre spacing)
Battery: Turnigy nano-tech 2s 460mah LI-PO
Switch: Schurter Voltage Switch SWA
Eggtimer Quantum & Perfectflite Strato logger CF (Willing to add others on request)
Note:
I have now built and successfully flown this design, I will upload some actual photos of it shortly.
Update:
Minor changes to clearances for make build easier.
Added a version that will take a Perfectflite Strato Logger CF.
Print instructions
Category: 3D Printing