SeacockHandle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cover for the seacock handle with dimensions of 22.5x3.5mm. The print file's component length is 150mm. You can…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
The cover for the seacock handle with dimensions of 22.5x3.5mm. The print file's component length is 150mm. You can cut to the needed length by placing the part section below the slicer bed level. A bit of extra length makes seacock manipulation easier.
To adjust for the different handle size use x/y scaling.
Outside of engine room the PLA is fine, higher temperature material should be used in there.
Print Settings
Rafts:
No
Supports:
No
0.2mm
Infill:
2%
Filament:
Any PLA/ABS Any
Notes:
3-4 wall lines should be used
Category: Sport & Outdoors