Hinged 7 inch HDMI 1024x600 Display Case for Ratrig V-Core 3.1 Enclosure 300
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display Case for Ratrig V-Core 3.1 Enclosure 300 build plate version
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 141
- Makes
- 0
- Views
- 1,399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
My remix allows you to mount the display without interfering with the printer's structure. The display bottom cover has channels for cable clips. Same with 2 chamber plates. Additionally, there is an 8mm hole for passing the webcam cable in the hinged plate.
You need 2x m3 16mm screws and nuts for hinges and 4x m3x12 for cover.
To mount the plates to the enclosure use the existing m6x12 screws.
In middle on the enlosure i used to attach the cables this clip this part: https://www.printables.com/pl/model/342557-cable-tie-mount-for-ratrit-v-core-31-with-enclosur
Print with ABS or PetG. Infill 35- 70%