1 / 9
Case for the USB-NeoHub by Olimex
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nice simple case for the USB-NeoHub by Olimex.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 33
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Nice simple case for the USB-NeoHub by Olimex.
There are versions with and without a logo.
The two parts are a pretty tight fit and is probably a good friction-fit (depends on your settings and printer) but you can screw it together with 2 M3-screws (you can threat it by screwing in a M3-screw). You need two 3 mm screws of minimal 10 mm.
If you have a Bambu-printer, see https://makerworld.com/en/models/245362 for ready to print profiles.
Happy 8-bitting;
Category: Electronics