1 / 2
Rain Diverter for NW53 / DN50 Pipes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a rain diverter for NW53 gutter systems as input and DN50 pipes as output.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 86
- Makes
- 0
- Views
- 718
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is used to collect rainwater from a gutter. The input side is compatible to the NW35 gutter pipe size. At the output (overflow) you can connect the DN50 pipe. The rainwater will be forwarded through a ¾" hose compatible output.
You have to clue both parts together. You don't need support structures. Brim is recommended since the model surface is very small. But this depends on your printer.
Print Settings:
0,2 layer, 4 walls, 20% infill, supports: no, brim: recommended