1 / 6
Meteostation Weather Shield (LaskaKit, AliExpress) - stackable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable and stackcable model for weather shield. Compatible with AliExpress or LaskaKit Meteostation.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 62
- Makes
- 1
- Views
- 422
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is 3D printable and stacable model of weather shield which can be purchased on many shops like AliExpress or LaskaKit.
It is compatible with LaskaKit Meteo Mini Meteostanice 2.0 and 1.0 versions.
LaskaKit
- Weather shield: https://www.laskakit.cz/kryt-pro-cidla-meteostanice--70x145mm--plast
- LaskaKit V1 meteostation:
- https://github.com/LaskaKit/Weather_Station_Mini/blob/main/3D/old/all_meteomini.3mf
- LaskaKit V2 meteostation:
- https://www.laskakit.cz/laskakit-meteo-mini-meteostanice/
- https://github.com/LaskaKit/Weather_Station_Mini
AliExpress search
Print instructions
- PETG for better weather features… But stringing between part joints is not nice :(
- Print support needed for all parts!
- Review GCODEs below, please.
- Be adviced!!!
- It is not recommended to ustack / dismount the weather shield once stacked together!!!
- It is possible to ustack / dismount the weather shield, but there is big chance that you will break one (or more) from 4 small vertical joints between parts. Therefore, it is not recommended to do so. If you need to break weather shield into parts again, you will need to use a glue very possibly.
- LaskaKit Meteostation V1 and V2:
- Print:
- 1x Weather shield - bottom part - 4x holes for M3 screws
- 5x Weather shield - middle parts
- It is possible to use more middle parts, but 5 of them is enough for LaskaKit Meteostations
- 1x Weather shield - top part - with M3 screw hole
- GCODE:
- Weather shield - 5x middle part_0.2mm_PETG_MK3S_6h14m.gcode
- Weather shield - top part + bottom part with M3 screw holes_0.2mm_PETG_MK3S_3h3m
- Stack it together carefully!
- Print:
- Full (AliExpress) Weather Shield:
- Print:
- 1x Weather shield - bottom part - 4x holes for M3 screws OR one more middle part
- 7x Weather shield - middle parts
- 1x Weather shield - top part - no M3 screw hole
- GCODE:
- Weather shield - AliExpress - top + bottom + 1 more middle.gcode
- Weather shield - AliExpress - 6x middle part_0.2mm_PETG_MK3S_6h14m
- Stack it together carefully!
- Print: