1 / 7
XL Hamster Laufrad mit optionaler Erhöhung / XL hamster wheel with optional elevation — image 1
1 / 7

XL Hamster Laufrad mit optionaler Erhöhung / XL hamster wheel with optional elevation

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

XL Hamster Laufrad mit optionaler Erhöhung / XL hamster wheel with optional elevation

Rating
1 / 5
Likes
26
Downloads
191
Makes
1
Views
1,261
Reviews
1

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike

XL Hamster Laufrad mit optionaler Erhöhung  

Hamsterlaufrad in 25cm Durchmesser. Mit der Verlängerung kann man das Rad auf den festen Boden stellen und dazwischen noch Streu packen, dann steht es stabiler und es sieht schöner aus.

Zusammengebaut wird es mit einer M8 70mm Gewindeschraube (13er Kopf) inkl. Mutter
Für die optionale Verlängerung braucht man zusätzlich noch eine M8 30mm und eine M8 90mm Gewindeschraube inkl Muttern natürlich.
zb. hier:
https://www.ebay.de/itm/175430120489

Zusätzlich für die Lagerung werden zwei 608Z Lager benötigt (22mm x 7m) in den Außenmaßen
zb. diese hier:
https://www.ebay.de/itm/313511223718

Zusammengebaut wird es wie auf der Explosionszeichnung.
Die kleine Unterlegscheibe kommt zwischen Schraube und das Lager im Inneren des Laufrades, damit die Schraube nicht das Lager festsetzt.

Man kann auch etwas Schraubensicherung auf die Mutter schmieren oder direkt selbstsichernde Muttern verwenden.

 

____________________________


XL hamster wheel with optional elevation


Hamster wheel with a diameter of 25 cm. With the extension you can place the wheel on the solid floor and put litter in between, then it is more stable and looks nicer.

It is assembled with an M8 70mm threaded screw (13mm head) including nut
For the optional extension you also need an M8 30mm and an M8 90mm threaded screw incl. nuts of course.
e.g. here:
https://www.ebay.de/itm/175430120489 

In addition, two 608Z bearings are required for the bearing (22mm x 7m) in the external dimensions
e.g. these here:
https://www.ebay.de/itm/313511223718 

It is assembled as shown in the exploded view.
The small washer is placed between the screw and the bearing inside the impeller to prevent the screw from seizing the bearing.

You can also apply some threadlocker to the nut or use self-locking nuts directly.

Tags