Tea bag dispenser click together system (S,M,L)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.23 – €0.28 net (excluding VAT)
For file: Tea_orga_vertical_end_connector_L-R_0.6n_0.3mm_PLA_MINI_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 13.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For all sizes. With connectors to click together vertically and horizontally.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 119
- Makes
- 0
- Views
- 913
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of the great original. Fits pickwick (S), Teekanne (M), and most other brands (L). Useful for tea enthusiasts who get around.
Printed in PLA, no supports. 0.3mm layer height and 0.6 nozzle.
L (Clipper, Lord Nelson, Yogi, Good Earth, Pukka, Meßmer, Jumbo, ah, tea of life, steep, etc. - standard size)
M (Teekanne, shorter and slimmer)
S (Pickwick, very small)
Depending on how you mount them, you might want to include holes for magnets; or a really nice idea which in hindsight I regret not to have done: https://www.printables.com/model/416513-tea-bag-dispenser-nails-and-screws-edition
= screw holes where you can slide the dispenser onto screws and easily take off again for refills individually. But you can always cut away the bit underneath the screw hole also to adapt it to a slide on.
UPDATE: New items!
- horizontal connectors (compatible between different box sixes); scale to 103 - 105% in x an y worked for me. For maximum stability choose a tight fit, attach one inside the left box and one from inside the right box; press together. I noticed this can differ between different filaments. (the squares are also not identical in both ways, sometimes, try turning 90degrees for a better fit, depending on layer squishing/warping during print)
- feet (5 and 10mm) to generate lift of the boxes when not mounted on a wall (e.g. placed on a shelf)
- rack top for stacking (S, M, L) and circular inset (helps with vertical stacking stability)
- end of row vertical connector (compatible between multiple sizes), mirror for left version
Have fun finally enjoying the wide range of teas you have properly!! :)