Tronxy X5SA Pro E3D Titan Directextruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Direct extruder E3D Titan for Tronxy X5SA Pro
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 50
- Makes
- 0
- Views
- 425
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A design to upgrade your Tronxy X5SA Pro with the direct extruder Titan from E3D with an ADXL mount.
You need:
2x M4x10 screws
4x M3x10 (or longer) screws
4x M3 heat inserts
2x M3 square nut or similar for spacing
1x E3D Titan Extruder (!!!mirrored version!!!)
and some cable ties
Printed with PETG but PLA should work as well
4-5 perimeters and 3-4 bottom and top layers
infill min. 30%, no supports needed
The assembly is very straight forward.
I used the 2 squarenuts to increas the the hotend distance a little bit to the front. Spacers, nuts or something similar should work as well, but for me it works fine withe the square nuts.
V2:
I added 2 parts with a small modification.
All heat inserts are in the adxl_mount now and the holes in the backplate for the mount are a little bit lower