1 / 1
RC SkidSteer V3.0 Printability Upgrades
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified selected components to be printable without supports.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 80
- Makes
- 1
- Views
- 633
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
All parts are 100% compatible with original model. All parts are printable with 0.2mm layer height.
1_main_housing
- Removed the bottom fillet with extreme overhangs and replaced it with a less steep chamfer.
- Reduced back of the arm motor mount by -0.18 mm to prevent overlap with the back cover.
- Added fillets and chamfers for a nicer result.
4_left_arm
- Reduced the diameter of the depression in the arm mount for shorter bridges.
- Split bridges around inner holes to allow printing without supports.
5_right_arm
- Reduced the diameter of the depression in the arm mount for shorter bridges.
- Split bridges around inner holes to allow printing without supports.
6_hub
- Split bridges around inner holes to enable printing without supports.
12_drivers_cage
- Removed unprintable overhangs at the front and added necessary chamfers.
- Removed unprintable overhangs from the bottom line (top when printed) of the grid pattern (which was slightly angled).
- Added a chamfer at the top to create less sharp edges.
These are not printability improvements, but feel free to use them:
Optional - 14_motor_cover
- Added gearbox cover to the motor restraint .
Optional - 25_track_tensioner_roller
- Removed depression for screwdriver, if you don't want it. You will probably need to screw wheel base before snapping the wheel in place.