1 / 1
RC SkidSteer V3.0 Printability Upgrades
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified selected components to be printable without supports.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 633
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (19)Powiązane
All parts are 100% compatible with original model. All parts are printable with 0.2mm layer height.
1_main_housing
- Removed the bottom fillet with extreme overhangs and replaced it with a less steep chamfer.
- Reduced back of the arm motor mount by -0.18 mm to prevent overlap with the back cover.
- Added fillets and chamfers for a nicer result.
4_left_arm
- Reduced the diameter of the depression in the arm mount for shorter bridges.
- Split bridges around inner holes to allow printing without supports.
5_right_arm
- Reduced the diameter of the depression in the arm mount for shorter bridges.
- Split bridges around inner holes to allow printing without supports.
6_hub
- Split bridges around inner holes to enable printing without supports.
12_drivers_cage
- Removed unprintable overhangs at the front and added necessary chamfers.
- Removed unprintable overhangs from the bottom line (top when printed) of the grid pattern (which was slightly angled).
- Added a chamfer at the top to create less sharp edges.
These are not printability improvements, but feel free to use them:
Optional - 14_motor_cover
- Added gearbox cover to the motor restraint .
Optional - 25_track_tensioner_roller
- Removed depression for screwdriver, if you don't want it. You will probably need to screw wheel base before snapping the wheel in place.