Orig. Opel Insignia Holder Luggage Net Trunk Holder 332817667
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gepackhalterung / Trunk Holder Adapter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 1
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Heute präsentiere ich hier mein erstes Model.
Es handelt sich um ein im Maß einstellbarer Adapter für die Laderaumhalterung des Opel Insignia.
Gedruckt ist das Ganze aus rTitan, wobei gutes ABS / ASA dafür auch reichen sollte. Bei einer Layerhöhe von 01,25 habe ich die besten Ergebnisse erzielt. Abgesehen von den Stl Files benötigt man noch folgende Materialien:
1x M4-Short Gewinde Ruthex
1x M3-Short Gewinde Ruthex
2x 2,5mm x 12,5mm Metallstab
1x Spiralfeder 20mm / Lang 5mm Durchmesser / 0,5mm Draht
1x M3 14-16mm Innensechskant Schraube
1x M3 Unterlegscheibe
Zusammengebaut wird die gesamte Halterung, wie in den Bildern erkennbar. Danach kann man über die Schaube das Spiel sehr gut einstellen.
Wichtig: Die Halterung ist nicht universell und muss somit für jede Seite einzelne angefertigt werden. Des Weiteren ist sie nicht für die Raumtrennung mit kleinem Harken gedacht. Sollte jemand diese benötigen, schreibt es doch gern in die Kommentare.
_______________________________________________________________________________________________________________
Today I am presenting my first model.
It is a dimensionally adjustable adapter for the Opel Insignia's load compartment bracket.
The whole thing is printed from rTitan, whereby good ABS / ASA should also suffice. I achieved the best results with a layer height of 01.25. Apart from the stl files, you also need the following materials:
1x M4 short thread Ruthex
1x M3-Short Thread Ruthex
2x 2.5mm x 12.5mm metal rod
1x spiral spring 20mm / long 5mm diameter / 0.5mm wire
1x M3 14-16mm hexagon socket screw
1x M3 washer
The entire bracket is assembled as shown in the pictures. You can then adjust the play very easily using the screw.
Important: The bracket is not universal and must therefore be made individually for each side. Furthermore, it is not intended for room partitioning with a small rake. If anyone needs this, please let us know in the comments.