Low Poly Lightbulb Lamp Shade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightbulb shaped low poly lamp shade, print in vase mode
- Rating
- 4.5 / 5
- Likes
- 26
- Downloads
- 102
- Makes
- 3
- Views
- 623
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For a few months now, I've had an IKEA Trådfri light bulb sitting on my desk as a status light, informing me of all sorts of things by blinking in different colors. The sight of the bare bulb got a bit old and caused way too many questions from visitors. So I designed this lampshade that fits seamlessly around the socket of the Trådfri bulb and the mount I got from Amazon. With the shade it is much easier on the eye, both when the lamp is lit to indicate and when it is off.
I printed the model in vase mode with a 0.8mm nozzle, a line width of 1mm and a line height of 0.24mm using the White Matte PLA from BambuLab. It creates a nice diffused glow that works very well for my use case. You might want to experiment with thinner walls if you want to use it mainly as a traditional lamp.