1 / 3
Runcam Thumb Pro Drone Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the Runcam Thumb Pro(W) Which attaches to the front of the TBS Source One V5 frame.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 73
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
To make the mount follow these steps:
- Print the model using 4 perimeters, 100% infill and 0% fan cooling (~25 min)
- Attach the Runcam Thumb Pro case (comes in with Runcam) to the 3D printed mount using one of the M2 screws and one M2 nut that are both included with the Runcam.
- Unscrew the Top Front 4 screws on the frame and screw the mount onto the frame using those same 4 screws.
Designed by: Theo Jarmer