Prusa i3 E3D v6 HotEnd Mount With Sensor (12mm and 18mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you print the mount with the sensor make sure you mirror it if you need the sensor on the right side of the hotend.…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 97
- Makes
- 0
- Views
- 965
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
If you print the mount with the sensor make sure you mirror it if you need the sensor on the right side of the hotend.
This is my tiny E3D v6 HotEnd mount for the Prusa i3. I've been using it for a few days now and I'm pretty happy with it. I'm planning on trying to make a fan mount to cool the hotend and the nozzle that goes with these parts too.
The x carriage I'm using is from here: http://www.thingiverse.com/thing:119616
You need 4x M4 screws that are around 20mm long to mount it to the carriage and 2x M3 screws that are around 25mm long to clamp the hotend.
(12/12/16) I added the 18mm version. Finally. I have no idea if it will work so can someone test it?
Category: 3D Printer Parts