Lumos Wireless Remote Handlebar Mount for Lectric XPedition

This mount was designed to attach a Lumos remote to an easy to reach position on the Lectric Xpedition.

Customization
The portion that interfaces with the remote is separate from the handlebar attachment. If you want to design your own but don't want to figure out all the detailed dimensions to interface with the Lumos remote you can use the two pieces I've designed and just make your own handlebar attachment. The attached drawing shows the dimensions you will need.

If you do make your own, matching the depth of the holes for the M2.5 bolts to the length of the bolt you want to use is important, there's only enough space for +/- 0.5mm on bolt length.

Printing Notes
I printed everything solid ASA. The snap feature works fine in PLA as well, but probably isn't the best material choice for UV exposure. 

V6 Cap:  0.1mm layer height. You need to add a print pause to include two M2.5 nuts in the print. 

V6 Snap Feature: 0.1mm layer height. This will need supports, you want to support on the side that doesn't have the little retention bumps. The features on this and the cap need to be pretty precise for the snap feature to work, but I haven't tried 0.2mm layers, that might work ok.

V6 Handlebar Attachment: 0.2mm layer height is fine for this, will also need supports.

Hardware
The V6 Cap has two M2.5 nuts in it, use two 12mm M2.5 socket cap head screws to secure. The length has to be 12mm to work. This is the set of bolts I have.

The V6 Handlebar Attachment uses an M4 nut and socket head cap screw to secure to handlebar. I used a 12mm bolt but I think 10mm will work.  This is the set of bolts I have.



I threw this documentation together quickly, if you're wanting to use this and have any questions post a comment and I'll try to respond!