Two-Color RepRack Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.19 – €5.12 net (excluding VAT)
For file: left-2 color-reprackhangerprintable_v1_0.4n_0.2mm_PETG_MK4IS_3h36m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.65 excluding VAT (range midpoint).
- Weight reported by the author
- 86 g
- Print time reported by the author
- 3.6 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple Two-Color Remix
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Let's show RepKord some good love here and show off that logo! All your friends will be jealous when they see it pop out and they will say “Wish mine looked that good”.
I remixed it to include two color changes so you have a three layer print. I chose black for the top and bottom layers with a red middle layer, but you can use your imagination to print something that is uniquely you.
I have included two, left and right, 3MF PrusaSlicer project files if you would like to utilize a textured build sheet as I did, I think it makes a much nicer exposed look to the sides that matter or you can just print either file twice if you don't want the texture. They are setup for .4mm Nozzle, .20mm Structural, 20% Infill, 5 Top and Bottom Layers and 4 Perimeters. I felt it would provide sufficient strength at those settings, feel free to change as you see fit. I also printed in PETG for the extra strength. I will also add GCODE and BGCODE files if you want to just print and go.
Many thanks to Alan "Pooch" Puccinelli for providing this awesome model to our community so we can easily and inexpensively store our 3d printing filament and don't forget to check out their website, www.repkord.com, for some great products and accessories to help make your life better and you will be way cooler too.
If you like this remix for the Hanger, please download, post some build photos and give it a like. By the way, I donate all PrusaMeters that I earn for makes and builds to education to help our kids learn more about this hobby that we love and enjoy. Thank you.