Bowden Tube Adapters for 4mm Tubes on 6 Spool filament dry box build
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapters to use 4mm PTFE tubes on the 6 Spool Filament Dry Box Storage System Caps included
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I used the most excellent dry box build from schiffer-soft.de
After printing all the parts I found the tube holders were much larger than 4mm standard tubes. In fact, they are 7.2mm.
What to do?
Make 4mm tube adapters with caps. I had a bit of trial and error during this design and prototyping to get the correct sizing and filament with custom settings to control shrinkage that may occur.
Printed on MK3S Mod
Filament eSun PLA+
Idle Temp 10C
First Layer: Nozzle 215C; Bed 60C
Other Layers: Nozzle 220C; Bed 60C
Advanced
Max Volumetric speed 15mm cubed/s
Print Setting
Infill: 100%
Brims on Adapters
Printer Setting
Limits
Max Acceleration Z: 500mm
Extruder
Lift Height .06mm
Smooth Sheet