1 / 4
Bowden Tube Adapters for 4mm Tubes on 6 Spool filament dry box build — zdjęcie 1
1 / 4

Bowden Tube Adapters for 4mm Tubes on 6 Spool filament dry box build

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapters to use 4mm PTFE tubes on the 6 Spool Filament Dry Box Storage System Caps included

Ocena
0 / 5
Polubienia
3
Pobrania
32
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I used the most excellent dry box build from schiffer-soft.de

6 Spool Filament Dry Box Storage System with Bowden Tubes by schiffer-soft.de | Download free STL model | Printables.com

After printing all the parts I found the tube holders were much larger than 4mm standard tubes. In fact, they are 7.2mm. 

What to do?

Make 4mm tube adapters with caps. I had a bit of trial and error during this design and prototyping to get the correct sizing and filament with custom settings to control shrinkage that may occur. 

Printed on MK3S Mod

Filament eSun PLA+
Idle Temp 10C
First Layer: Nozzle 215C; Bed 60C
Other Layers: Nozzle 220C; Bed 60C

Advanced
Max Volumetric speed 15mm cubed/s

Print Setting
Infill: 100%

Brims on Adapters 

Printer Setting
Limits
Max Acceleration Z: 500mm
 

Extruder
Lift Height .06mm

Smooth Sheet

 

Tagi