1 / 2
Ryobi Charger (RC18115) Wall Mount Cradle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This lets you wall mount the charger like the other ones allow.
- Rating
- 4.778 / 5
- Likes
- 68
- Downloads
- 697
- Makes
- 11
- Views
- 2,338
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This solves for the odd annoying geometry of this charger so you can mount it to the wall, like most of the other chargers allow.
It sits nicely without any kind of adhesive but if you want a more secure solution, double sided tape or hot glue on the cradle and on the top of the charger unit will secure it into the print very well.
V2: 20/11/2024
- Adds a Stronk and SuperStronk version after feedback about rigidity.
- Stronk makes the spine thicker for less moment of flex, greater fillets for strength
- SuperStronk adds side walls for extra bracing and should be extremely rigid.
